Find Waste Tires Extracted, Used Tires Extrating, Cracked Machine For Tires on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
| Payment Type: | L/C,T/T,Western Union |
|---|---|
| Incoterm: | FOB,CIF |
| Min. Order: | 1 Set/Sets |
| Delivery Time: | 20 Days |
Model No.: LJ-9
Introduction of Shangqiu Sihai Energy Technology Co., Ltd
Our company is located in Chenfeng Avenue, Pingtai Economical Development Zone, Shangqiu, Henan, China. It covers an area of 75,000 square meters, of which there are two modern production workshops cover an area of 60,000 square meters. Our company mainly engaged in waste rubber, waste plastics, waste tires, waste aluninum foil, waste mineral oil and Other environmental pyrolysis equipment, distillation equipment and peripheral ancillary equipment processing production and sales. Company annual output is more than 400 sets of environmental protection equipment. Our products have been exported to Europe and the United States, South Africa, Southeast Asia, the Middle East and the Mainland and other 36 countries and regions.
Raw materials of Car tires extraction to fuel oil pyrolysis plant
| Item | Raw Materials | Output |
| Tyres | Steel wire tyre | 40%--50% |
| Nylon tyre | ≈40% | |
| Bicycle tyre | ≈35% | |
| Paper pulp | Coarse material | ≈15% |
| Water washing material | 23%-26% | |
| PE material | ≈70% | |
| Cable skin | PE cable skin | ≈85% |
| PVC cable skin | ≈25% | |
| Pure rubber cable skin | ≈35% | |
| Telephone wire | ≈50% | |
| Life Garbage | Pure plastic bag | ≈50% |
| Coarse material with water | ≈15% | |
| shoes | Sports shoe`s sole | 27%-33% |
| Black rubber | ≈35% | |
| Gum outsole | ≈45% | |
| Others | Common rubber pipe | ≈30% |
| Carpets | ≈35% | |
| Aluminum foil | ≈30% | |
| Car glass bead | ≈50% | |
| PP Beverage bottle | ≈50% |
Technical Parameters of Car tires extraction to fuel oil pyrolysis plant
Model:LJ-9
Raw material:Waste tire, waste plastic, waste rubber
Structure:Horizontal
24hours processing capacity:8-10tons raw materials
24hours oil output:3.2-4.5tons fuel oil
Work pressure:Atmospheric
Host speed:0.4r\min
Power:15.5KW
Cooling:Water cooling
Lose water(T\H):8
Transport:External gear drive
Heating method:Directly
Installation:Foundation
Noise dB(A):≤85
Reactor size length*wideth:2200x6600
Working form:batch
Weight of Reactor(T):29
Manufacuring time:20days
Features of Car tires extraction to fuel oil pyrolysis plant
a. In the design of pyrolysis key device, completely overcome the local heat uneven, easy to break, low yield, short life and other unfavorable factors of the current vertical flat bottom pyrolysis plant.
b. With fast and practical feed and slag system.
c. Efficient gas heating system. In the process of refining, when the heated gas reaches 150 degrees Celsius, it will produce a lot of gas which can not be liquefied in normal temperature and pressure methane to butane.These gases are fully burned by specially designed gas nozzles, will produce a lot of energy which greatly saves energy.
d.Flue dust removal system has a desulfurization dust cather(qualified), equipped with two ways water impact cyclone dust removal chamber, which can ensure the discharge of flue outlet reach safe discharge standard.
Working process of Car tires extraction to fuel oil pyrolysis plant
1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;
2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.
3. Cooling, oil and gas condenses into fuel oil through the cooling system;
4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;
5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.
Treatment of the raw material
↓
Hydraulic automatic feeding in
↓
Automatic slag-out ← pyrolyzer → desulphurization and deduster
↓ ↓
Air package draft fan
↓ ↓
1st tube condenser first 2nd purifier
↓ ↓
2nd tube condenser second 2nd purifier
↓ ↓
Cooling tower ← calandria condenser emission reach the standard
↓
Oil and gas separator product oil
↓
Water seal explosion-proof machine
Product Categories : Waste Tire Pyrolysis Plant
